Can-Am Commander Forum banner
1 - 1 of 1 Posts

12 Posts
Pull the codes

1. turn key to lights on position

2. use mode button and scroll to engine hour (EH) on gauge

3. press and HOLD the mode button while quickly toggling between high and low beam ( min 3 toggles in 2 seconds)

4. If there is any P-CODES they will be displayed

Sent from my SM-S908U using Tapatalk
Good info. I'll have to remember this

Sent from my SM-N986U using Tapatalk
1 - 1 of 1 Posts