Can-Am Commander Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter · #1 ·
Would this be ok to use in my 2011 can am commander 1000.i know it calls for 5w40 and all.been reading up on oils and read that SN oil rateing is better oil and trumps over the other lower S rated oils.and can be used where it calks for them.any advice on this oil? Not wanting to start an oil argument just wanting advice.
 

·
Super Moderator
Joined
·
26,281 Posts
No argument here I run full synthetic 20/50. Can am uses a lighter oil for cold climate. But in my book any oil is better than no oil. As long as you don't ever see low oil scroll across the dash then you have enough pressure for it to survive.
 
1 - 2 of 2 Posts
Top