Can-Am Commander Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
I'm trying to find a Rack and pinion for my 2015 Commander. The one I purchased the pinion is to small and the tie rod threads are smaller so basically the wrong one. Can someone help with the right one. I have already upgraded the tie rods to supper atv. When looking on line its hard to tell if they are right ones and I don't want to purchase wrong one again. Thank in advance
 

·
Super Moderator
Joined
·
25,539 Posts
11 to 13 same
14 to 14 same
15 up same.

Wicked built Rackzilla 11-13 and a 14 model. They do not make one for 15 and up.

Thinking satv makes one fir 15 and up. But the track record for the rackboss is less desirable than the oem racks.
 

·
Registered
Joined
·
3,347 Posts
Go back to a oem rack and put a rack brace on the machine. I believe Acefire has the template for the brace.
If your oem rack is still salvageable send it to super Dave and have him rebuild it.
I have a rack from super atv and the bushing material they use is garbage.


Sent from my iPhone using Tapatalk
 
1 - 5 of 5 Posts
Top