Can-Am Commander Forum banner

Need help! Commander cutting out

3K views 33 replies 6 participants last post by  acefire 
#1 ·
When it gets warmed up I have this surge problem. Under acceleration it cuts out then picks back up. I’ve changed the fuel pump and it has a new air filter. Any help would be appreciated.
 
#6 ·
Update ?


Sent from my iPhone using Tapatalk
 
#24 ·
You might try checking/cleaning the throttle body, also. Being a drive by wire system, the throttle plate is motor driven, controlled by the TPS. Poor electrical connections or filter oil residue might cause it to move slower than it should. Just something else to check and rule out.
Text Font Paper
Text Font Paper Parallel Paper product
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top