[Spud]

My digital/analog display on the Commander will read 0 MPH then start reading correctly, The lights in it quit working , the sport mode light shut off for awhile then started working again. I plan to check all grounds tomorrow. Just wondering if anyone had the same issue,

Thanks

 

[cannedham]

Pin #20 (black wire) is the ground on the guage connector if you want to check it with a meter.

 

[Spud]

Everything is working now.Hard to troubleshoot. I put 100 hard miles on the Commander at the Glamis sand dunes. It ran great. Stock power but that is good enough.

 

[Spud]

I ordered a new speed sensor I'll know more next time I take it out.

 

[Spud]

I did take the speed sensor out and clean it. Not the most enjoyable task. Tight quarters in there. Did get a little bit of sludge off of it.