Can-Am Commander Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hello
I have a 2014 commander 1000xt with an upgraded triple pass radiator put on a couple years ago. Currently having an issue with the cooling system. Front end raised up and coolant filled my buggy seems to heat up to 5 bars for the fan to come on and that is where it stays never cooling back down. Looking for some advice on what may be causing it. I bled the system and can feel the air flow through the radiator and can feel the outflowing tube from the bottom of the radiator is cool. My thought is maybe the thermostat isn't opening the whole way?
 

·
Registered
Joined
·
7,956 Posts
I’ve seen threads on here regarding air pockets and water pump impeller failure. If you haven’t had the system open recently, the latter may be your troubles. Someone who knows these machines better will chime in. Good luck. Boog.


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
7,956 Posts
And welcome to the forum.


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
3,325 Posts
That's where I'd start. Assuming radiator isn't internally clogged.
Yes I’d double check the radiator. I finally plugged my tcp mudder up to the point where I had to pull it after 3 years of mud.
Also like someone else asked have you had the cooling system open recently?? Is the reservoir full? The stock thermostat makes these a pain to bleed


Sent from my iPhone using Tapatalk
 
1 - 5 of 5 Posts
Top