Can-Am Commander Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
39 Posts
Discussion Starter #1
Ok so coming off the hill this morning when I hit a flat I noticed my engine bogged down. Finally the engine light came on and it said check engine. It went back off going down another hill but came back on when I hit flat road and stayed on as I came back up another hill to my truck. When I loaded On trailer I noticed my headlights was on and key was in between headlights on and headlights off. Once I switched key to headlights off the light went out and so did message. When I got home I ran it up the road and it had full power and light or message never came back on. I ran it pretty hard to so I could see if it would make it do it. Could my key not being all the way over made this code come up or do I have an underlying issue? Thanks
 

·
Super Moderator
Joined
·
25,525 Posts
P0501 is a speed sensor code. Probably turning key was a fluke to turn it off. Pull speed sensor clean it and or replace it.
 
1 - 3 of 3 Posts
Top