Can-Am Commander Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
If I replace front A arms on my 800 XT 2018 with the “high clearance 1.5 forward offset”, what kind of a arms would I need to put on the rear?
66164
 

·
Registered
Joined
·
7,956 Posts
Welcome to the forum. I don’t think you have to necessarily change the rear.


Sent from my iPhone using Tapatalk
 

·
Super Moderator
Joined
·
25,310 Posts
Don’t have to put any on rear if you don’t want to. Those are 1.5 forward arched . Not lift arms . But be prepared for the head ache of putting them on and getting the geometry right . And you will need new longer axles . Hasn’t been but a few on this forum that have done those arms and left them on. Save the head ache and get the stock replacement arched arms .
 

·
Premium Member
Joined
·
50 Posts
I have them on mine, with the 2.0 axles, I've had no issues with them yet, not saying I won't, but been lucky so far, and I'm running them with 40s.
 
1 - 8 of 8 Posts
Top