Can-Am Commander Forum banner

2021 Commander Max Bed Alignment

1150 Views 6 Replies 3 Participants Last post by  zx2ner05
Does anyone have a 2021+ commander max bed that doesn’t sit square on the machine? Mine has been like this since day 1, and I’m curious if anyone knows which bolts need to be removed to shimmy it over? Also, do those bolts need to be heated before removal?
Thanks in advance!
1 - 7 of 7 Posts
I just bought a 22 Max XT-P and after a week or so I noticed the same thing... the left side of the bed is sitting just a lil lower than the right. Were you able to figure out how to adjust the bed? On the older models there were two adjustable pegs. Haven't gotten a chance to really dig into it yet though.
I was able to adjust, however nothing really changed. If you figure out a solution please let me know. It’s annoying to look at.
Howdy! I have a 22 Commander Max XTP and noted the same misalignment with the bed. I asked the dealership to look into the issue. A technician determined that adjustment could not be accomplished by loosening bolts.
Howdy! I have a 22 Commander Max XTP and noted the same misalignment with the bed. I asked the dealership to look into the issue. A technician determined that adjustment could not be accomplished by loosening bolts.
I believe that to me true, however I didn’t make a bit of progress loosening the 8 bolts on the back and applying some leverage. It did not fix the issue totally, only a centimeter or two.

What does the fewer suggest?
I believe that to me true, however I did make a bit of progress loosening the 8 bolts on the back and applying some leverage. It did not fix the issue totally, only a centimeter or two.

What does the dealer suggest?
Seems to be a pretty broad problem... I still haven't been annoyed enough to dig into it but I'll take some improvement over nothing, thanks for the update. Interested to see what the dealer says as well, taking mine back in soon for a new roof.
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top