Can-Am Commander Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
2,412 Posts
Discussion Starter #1 (Edited)
I'm looking for a source for an 18" light bar, preferably with osram or Cree chips and preferably with a 4d, or better yet, 5d lens. I can find a ton of 108 watt (36x3w) 18" bars on eBay with standard lens and that maybe what I end up going with. I've found one 180watt 18" bar with 5watt chips and a 4d lens but it ships from china.

A 17" might be ok. A 20" will work but the two top emitters will reflect off of the back side of the tube - I can find plenty of 20s.

It's to go in the light rack pictured below and in the slot on a brp sport visor.

Suggestions?
 

Attachments

·
Registered
Joined
·
2,412 Posts
Discussion Starter #3
I decided to go with one of the cheap 17"/18" bars. It was about $36 shipped and came with a harness. It's very bright.

I trashed my gearbox yesterday so now I've got this and a new windshield waiting to go on but they'll have to wait on the gearbox.
 

Attachments

1 - 5 of 5 Posts
Top