Can-Am Commander Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 4 Results
  1. Commander General Discussion
    Looking for best option to replace tie rods on 2017 Commander 800. Riding in rocky & rough terrain. Factory tie rods are shot at 1400kms. Machine has a 2" lift on it (Highlifter). I hear good things about the RT Pro kit. Anyone with experience they can share? Any tips or concerns with the...
  2. Commander General Discussion
    Installed RT Pro Tie Rods and after about 16 hours noted that the bolt had bent. I did now knowingly hit any hidden boulders or stumps. I called RT Pro and after a discussion was told that their 12mm bolts were made of stainless steel and we're the weak link in their kit (mind you costs $300)...
  3. Commander General Discussion
    Had a RT Pro 2" lift installed on 17 Commander 1000 XP using the stock springs and seek shock pre-load settings for front and rear. I see that if the RT Pro springs are used the recommended setting is 0 in the back and +1 in the front. Any suggestions using the stock springs?
1-3 of 4 Results
Top