Can-Am Commander Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Commander General Discussion
    So I have read where several people have had troubles through the years with the plastic “Y” fitting that comes from the factory on the Can-Am Commander radiator hoses. I am curious if anyone has used a “T“ instead of a plastic replacement? If so, were there any overheating issues with the...
  2. New Member Introductions & Site Assistance
    My 2013 Commander 1000 XT began to overheat for the very first time. It did so after ploughing snow for a couple of hours. In fact, steam began to billow into the cab before I quickly shut down. The engine light came on, the display indicated overheating and the Commander went into limp mode...
  3. Commander 800R
    I got a nice commander 800XT but it keeps over heating when I take it out. I have replaced radiator with a new one, checked the water pump seems to turn when engine run, thermostat operates fine, no oil in coolant and no smoke from exhaust. Lost at what else to look at. Looking for guidance
  4. Commander General Discussion
    Hey all, I have a problem and I can't seem to find it here on the forums. I have a 2012 can am commander that I just purchased, only has 550km on it. Was out riding last weekend and it went into limp mode with the temp flashing. Well stupid me kept driving to try and get it back to camp. We...
  5. Commander General Discussion
    I was riding this past weekend when suddenly my commander started overheating. I cleaned the radiator. the next day I rode for about 15 min befor it went to limp home mode. the coolant was filled to the max fill line a few days ago but is a little low now. no signs of leakage but i did notice...
1-5 of 5 Results