Can-Am Commander Forum banner
cooling fan
1-3 of 3 Results
  1. Commander General Discussion
    Notice my fan wasn't kicking in once I hit 5 bars on temp gauge . Wondering if anyone has any idea what it could be , jumped the fan from the battery and fan kicks on ,also tried unplugging connector on temp sensor and it never kicked on . 2012 commander 800
  2. New Member Introductions & Site Assistance
    2012 Commander 1000 XT - The cooling fan comes on within seconds of start-up, runs continuously and then stops when the engine is shut off. No bars on the engine temp gauge. Everything is dry, we haven't driven through any deep water lately. Whaddaya think? Fan relay, temperature sensor?
  3. Commander Electric
    Having fan problems. The fan doesn’t run. I can reach in and give the blades a little flick and it’ll kick on and run like normal. Checked fuses. Checked wiring. Greased connections with dielectric. Installed a fan over ride. Same thing. Turn the override switch on and it gets power but needs a...
1-3 of 3 Results