Clutch kit recommendations - Can-Am Commander Forum
 3Likes
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 13 Old 04-13-2019, 07:17 PM Thread Starter
Senior Member
 
NvyMustang's Avatar
 
Join Date: May 2011
Location: Central Maine
Posts: 261
Clutch kit recommendations

Itís been quite a while since my last post as the search usually has everything Iím looking for however, I just canít find what Iím looking for this time.

I have a 2011 800 with about 3600 hard miles on it. Took it out today for a quick spin and it felt like the clutch was slipping.

I want to rebuild it with a good kit but just canít seem to find whatís best. Have 27Ē tires and Iím at low altitudes. I Also read a good spring will help as well. Looked on Bollaxís UATV site but didnít see anything for my machine. Can someone point me in the right direction.

Thanks
NvyMustang is offline  
Sponsored Links
Advertisement
 
post #2 of 13 Old 04-13-2019, 07:31 PM
Official Site Vendor
 
bollax's Avatar
 
Join Date: Feb 2013
Location: Corona, Ca / Baja Mexico
Posts: 5,824
Quote:
Originally Posted by NvyMustang View Post
Itís been quite a while since my last post as the search usually has everything Iím looking for however, I just canít find what Iím looking for this time.

I have a 2011 800 with about 3600 hard miles on it. Took it out today for a quick spin and it felt like the clutch was slipping.

I want to rebuild it with a good kit but just canít seem to find whatís best. Have 27Ē tires and Iím at low altitudes. I Also read a good spring will help as well. Looked on Bollaxís UATV site but didnít see anything for my machine. Can someone point me in the right direction.

Thanks
PM sent, and YES I can help.
NvyMustang likes this.



Check out my web site
* NEW E-MAIL Address*
[email protected]
bollax is offline  
post #3 of 13 Old 05-01-2019, 07:08 PM Thread Starter
Senior Member
 
NvyMustang's Avatar
 
Join Date: May 2011
Location: Central Maine
Posts: 261
Quote:
Originally Posted by bollax View Post
Quote:
Originally Posted by NvyMustang View Post
Itís been quite a while since my last post as the search usually has everything Iím looking for however, I just canít find what Iím looking for this time.

I have a 2011 800 with about 3600 hard miles on it. Took it out today for a quick spin and it felt like the clutch was slipping.

I want to rebuild it with a good kit but just canít seem to find whatís best. Have 27Ē tires and Iím at low altitudes. I Also read a good spring will help as well. Looked on Bollaxís UATV site but didnít see anything for my machine. Can someone point me in the right direction.

Thanks
PM sent, and YES I can help.


Thanks Ed! Got my clutch back today, you do amazing work! Now just to put the rest of the Machine back together and get riding.

Thanks!
NvyMustang is offline  
Sponsored Links
Advertisement
 
post #4 of 13 Old 05-01-2019, 07:36 PM
Senior Member
 
Boogerhead's Avatar
 
Join Date: Nov 2014
Location: Henderson CO
Posts: 7,183
Quote:
Originally Posted by NvyMustang View Post
Quote:
Originally Posted by bollax View Post
Quote:
Originally Posted by NvyMustang View Post
Itís been quite a while since my last post as the search usually has everything Iím looking for however, I just canít find what Iím looking for this time.

I have a 2011 800 with about 3600 hard miles on it. Took it out today for a quick spin and it felt like the clutch was slipping.

I want to rebuild it with a good kit but just canít seem to find whatís best. Have 27Ē tires and Iím at low altitudes. I Also read a good spring will help as well. Looked on Bollaxís UATV site but didnít see anything for my machine. Can someone point me in the right direction.

Thanks
PM sent, and YES I can help.


Thanks Ed! Got my clutch back today, you do amazing work! Now just to put the rest of the Machine back together and get riding.

Thanks!
Good deal! Glad Ed got you taken care of. Thereís a guy on here from WV thatís supposedly pretty good at helping you put your machine back together so you can get to riding. (As long as you donít live in ĎRado). Other than that he goes everywhere from the reports Iíve read. I think they call him Acehole or Ace in the hole or something like that. Anyway good luck with your project.
nick1993 likes this.

I may have to grow old, but you can't make me grow up!
Boogerhead is offline  
post #5 of 13 Old 05-01-2019, 09:14 PM
Official Site Vendor
 
bollax's Avatar
 
Join Date: Feb 2013
Location: Corona, Ca / Baja Mexico
Posts: 5,824
Quote:
Originally Posted by NvyMustang View Post
Quote:
Originally Posted by bollax View Post
Quote:
Originally Posted by NvyMustang View Post
Itís been quite a while since my last post as the search usually has everything Iím looking for however, I just canít find what Iím looking for this time.

I have a 2011 800 with about 3600 hard miles on it. Took it out today for a quick spin and it felt like the clutch was slipping.

I want to rebuild it with a good kit but just canít seem to find whatís best. Have 27Ē tires and Iím at low altitudes. I Also read a good spring will help as well. Looked on Bollaxís UATV site but didnít see anything for my machine. Can someone point me in the right direction.

Thanks
PM sent, and YES I can help.


Thanks Ed! Got my clutch back today, you do amazing work! Now just to put the rest of the Machine back together and get riding.

Thanks!
Thank you, Enjoy the ride, be saafe.



Check out my web site
* NEW E-MAIL Address*
[email protected]
bollax is offline  
post #6 of 13 Old 05-01-2019, 09:27 PM Thread Starter
Senior Member
 
NvyMustang's Avatar
 
Join Date: May 2011
Location: Central Maine
Posts: 261
Quote:
Originally Posted by Boogerhead View Post
Quote:
Originally Posted by NvyMustang View Post
Quote:
Originally Posted by bollax View Post

PM sent, and YES I can help.






Thanks Ed! Got my clutch back today, you do amazing work! Now just to put the rest of the Machine back together and get riding.



Thanks!


Good deal! Glad Ed got you taken care of. Thereís a guy on here from WV thatís supposedly pretty good at helping you put your machine back together so you can get to riding. (As long as you donít live in ĎRado). Other than that he goes everywhere from the reports Iíve read. I think they call him Acehole or Ace in the hole or something like that. Anyway good luck with your project.


Thanks- just have to put the rear trailing arms on and sway bar. That link you sent for parts worked. That guy had What I needed.

Iíve had this beast since the day it hit the showroom when the commanders first came out and love wrenching on her. Iíve spent the past month finally catching up on all the things I couldnít get done when deployed. Retirement is good, especially being able to ride everyday, things just seem to break more frequently now tho.... not sure if thatís good or bad.

Nice to be back in the forum after a long time away. Looks like some names have changed but the issues seem the same with the core group of original guys still kicking around. Iím gonna try and make the roundup some day.
NvyMustang is offline  
post #7 of 13 Old 05-01-2019, 10:39 PM
Super Moderator
 
acefire's Avatar
 
Join Date: Aug 2012
Location: Charleston WV
Posts: 22,386
Well you come on down whenever you get a chance and we will ride !!
NvyMustang likes this.
acefire is offline  
post #8 of 13 Old 05-02-2019, 03:05 PM
Junior Member
 
Join Date: May 2019
Posts: 11
New to the forum and commander ,want somethinging done with my primarry ..would like info on lok mod and any kits available im in canada after reading is troy here in canada doing the same work as bolax ? Does he have contact info thanks for any help or should I just st go with a cvtec primary 621 shiped here in canada in canadian funds

Last edited by Jayson115; 05-02-2019 at 04:05 PM.
Jayson115 is offline  
post #9 of 13 Old 05-02-2019, 04:36 PM
Official Site Vendor
 
bollax's Avatar
 
Join Date: Feb 2013
Location: Corona, Ca / Baja Mexico
Posts: 5,824
Quote:
Originally Posted by Jayson115 View Post
New to the forum and commander ,want somethinging done with my primarry ..would like info on lok mod and any kits available im in canada after reading is troy here in canada doing the same work as bolax ? Does he have contact info thanks for any help or should I just st go with a cvtec primary 621 shiped here in canada in canadian funds
contact Troy [email protected]



Check out my web site
* NEW E-MAIL Address*
[email protected]
bollax is offline  
post #10 of 13 Old 05-08-2019, 07:00 PM
Junior Member
 
Join Date: Apr 2019
Posts: 18
I see alot of people running the UATV stuff and haven't heard a bad thing about them.
Jordan Lanier is offline  
Reply

  Lower Navigation
Go Back   Can-Am Commander Forum > Can-Am Commander General Discussion > Commander 800R

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Clutch upgrade (Maverick Turbo parts) sny7617 Commander Performance Modifications 309 04-16-2019 12:03 PM
Primary Clutch pullers for sale starky1 Commander Parts and Products For Sale 2 11-30-2018 08:37 AM
Clutch upgrade help Cainer51 Commander Performance Modifications 7 09-27-2017 03:07 PM
800 DPS clutch disassembly Downard254 Commander Performance Modifications 19 08-14-2017 07:28 PM
Difference between new clutch and clutch kit.. spyderchop Commander Performance Modifications 9 06-18-2016 06:54 PM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome