New guy from Colorado

ravridge · 02-13-2011, 03:52 PM

Hi everyone, I've been reading this forum and have seen a wealth of questions and answers that are helping to narrow down my pick. It's time to go see a dealer but there is only one I can find in the Denver area. I have an Outlander Max XT400 and this dealer never seems to have basic parts like filters, crush washers o rings in stock for simple oil changes. Colorado members where did you get your Commander and would you recommend them ? A trip to a neighboring state is not out of the question so what is your advice?

OSOKILL · 02-13-2011, 04:00 PM

welcome to the forum =]]

markl · 02-13-2011, 04:11 PM

Welcome!

Robmc80 · 01-20-2012, 06:58 PM

Quote: Originally Posted by ravridge

Hi everyone, I've been reading this forum and have seen a wealth of questions and answers that are helping to narrow down my pick. It's time to go see a dealer but there is only one I can find in the Denver area. I have an Outlander Max XT400 and this dealer never seems to have basic parts like filters, crush washers o rings in stock for simple oil changes. Colorado members where did you get your Commander and would you recommend them ? A trip to a neighboring state is not out of the question so what is your advice?

I bet we got ours at the same place, RPM motor sports? I agree they aren't that great as far as what they have in inventory. I don't know where exactly your at but there is a dealer in Greeley(I believe just because I went there of few times with a buddy for parts my Renigade needed but its been a long time) and I know there is a place up by Gunnison in the mountains and they are great. They have the bolts on o rings and whatnot's that a person like me always needs. And they are very knowledgeable and friendly besides the fact they are a Polaris dealer too, LOL. But there is good riding there too and they will help you get your Commander street legal. All this is from memory and I am sure without names it doesn't help but I just wanted to let you know there is more out there. If you know of a place that works on them PLEASE let me know.

Colo_Commander · 01-20-2012, 07:33 PM

Welcome to the forum from the other side of the hump.

I bought mine out of state (Flagstaff, Az) as the locals were about 6 mo behind in anticipated deliveries.. I have not found a store online or other wise that stocks more than filters/oil. I have started stock piling parts I think I may need.

SaintlyBrees · 01-20-2012, 10:23 PM

Welcome to the forum!

I'm from northern New Mexico and bought mine in Colorado. Really impressed by the dealer so far, but he is a bit far from Denver.

Fun Center Cycles in Durango. Good folks, good stock of parts and accessories, great service. They had a bit of a hard time getting my ride in, but that was a BRP issue and they compensated me for my wait with a free 12 month extended warranty.

They had an Pure magnesium metallic LTD on the floor when I was there last week.

ravridge · 01-21-2012, 02:25 PM

Thanks for the welcomes ! Kind of got off of the search for SxS due to the holidays and stuff but the urge has returned. You are right on the money about RPM, I wish there was some dealer competition in the Denver area but hell Greeley is only an afternoon drive away, Durango's quite a ways to go and service during warranty might be tough. As far as someone to work on them if you find someplace please post it.Thanks again

Willyard · 04-27-2012, 02:04 AM

I got my Can-am Commander X1000 at Fun Center in Durango also. They usually have a lot to choose from but as of yesterday they looked like they sold a ton of inventory. They usually get stuff in fast. Give them a call see what they have in stock or maybe have them order you what you want if they don't have what you're looking for.

Jriggs · 04-27-2012, 08:49 AM

Welcome

1318matt · 04-27-2012, 05:31 PM

There is a dealer in Grand Junction " All-Terrain Motorsports " and there is a dealer in Montrose "Montrose Implement." I just recently bought two commanders from Caly but I got a sweet deal on them and had a family member haul them out for a family re-union. However, Montrose said they could get me out the door for under 15K on a 2012 X. That is by far the best deal I could find In Colorado. Hope this helps.

02-13-2011, 03:52 PM	#1
ravridge [OP] Junior Member Join Date: Jan 2011 Location: Colorado Member #1552 Posts: 3 ()	New guy from Colorado Hi everyone, I've been reading this forum and have seen a wealth of questions and answers that are helping to narrow down my pick. It's time to go see a dealer but there is only one I can find in the Denver area. I have an Outlander Max XT400 and this dealer never seems to have basic parts like filters, crush washers o rings in stock for simple oil changes. Colorado members where did you get your Commander and would you recommend them ? A trip to a neighboring state is not out of the question so what is your advice?

02-13-2011, 04:00 PM	#2
OSOKILL Administrator Join Date: Jun 2010 Location: Calif Member #358 Posts: 1,151 ()	welcome to the forum =]] __________________ Silent souls make .308 holes www.atvblog.net www.can-amforum.com

01-20-2012, 07:33 PM	#5
Colo_Commander Senior Member Join Date: Dec 2010 Location: NW Colo. Member #1404 Posts: 629 ()	Welcome to the forum from the other side of the hump. I bought mine out of state (Flagstaff, Az) as the locals were about 6 mo behind in anticipated deliveries.. I have not found a store online or other wise that stocks more than filters/oil. I have started stock piling parts I think I may need. __________________ 2011-1000XT / 2012-AC WildCat Mods: Sliders, Fr Rack, F&R Bumpers, Harness Bar W 3"/5 pt, Custom: F&R Tows/Tie Downs, Muff Shield and Roof/Rack. Dual Batts W / isolator. Lowrance 5M Baja GPS mtd in Turnkey UTV GPS Dash Panel, Exhaust Wrapped, Pro Armor Doors, Rackzilla, Holz Steering Brace, Mr RPM Remote O.F. Mnt, 2012 Knuckle Mod, Drift HD170 Stealth It's A Rock - Get Over It!: Factory UTV 1/2" 1 Pce, Front & A Arms UHMW Skids Vids

01-20-2012, 10:23 PM	#6
SaintlyBrees Senior Member Join Date: Sep 2011 Location: Chama, NM Member #3371 Posts: 253 ()	Welcome to the forum! I'm from northern New Mexico and bought mine in Colorado. Really impressed by the dealer so far, but he is a bit far from Denver. Fun Center Cycles in Durango. Good folks, good stock of parts and accessories, great service. They had a bit of a hard time getting my ride in, but that was a BRP issue and they compensated me for my wait with a free 12 month extended warranty. They had an Pure magnesium metallic LTD on the floor when I was there last week. __________________ 2012 800R XT Camo In-dash Garmin 650t Navigation (TX to Bryan for his install video) Bad Dawg Hard Roof Bad Dawg 1/2 Windshield Bad Dawg Dual Storage in rear Rear view Mirror TurnKey UTV Heat Shield for bed TurnKey UTV Harness Bar Can-Am LH & RH Side Mirrors Rear Can-Am Screen Can-Am Snow Plow Can-Am radiator protector Can-Am Cover K&N Air Filter 12/1/14 - Extended warranty ends and mods begin Last edited by SaintlyBrees; 01-20-2012 at 10:27 PM.

04-27-2012, 08:49 AM	#9
Jriggs Senior Member Join Date: Jan 2012 Location: Fort worth texas Member #4131 Posts: 182 ()	Welcome __________________ 2012 Commander 1000 XT Magnesium 14" STI HD2 Utv Mountain Rear cage and seat Can Am multimount winch kit

02-13-2011, 04:11 PM	#3
markl Senior Member Join Date: Nov 2010 Location: Tucson Member #1210 Posts: 870 ()	Welcome!

01-20-2012, 06:58 PM	#4
Robmc80 Senior Member Join Date: Jan 2011 Location: Brighton CO Member #1691 Posts: 427 ()	Quote: Originally Posted by ravridge Hi everyone, I've been reading this forum and have seen a wealth of questions and answers that are helping to narrow down my pick. It's time to go see a dealer but there is only one I can find in the Denver area. I have an Outlander Max XT400 and this dealer never seems to have basic parts like filters, crush washers o rings in stock for simple oil changes. Colorado members where did you get your Commander and would you recommend them ? A trip to a neighboring state is not out of the question so what is your advice? I bet we got ours at the same place, RPM motor sports? I agree they aren't that great as far as what they have in inventory. I don't know where exactly your at but there is a dealer in Greeley(I believe just because I went there of few times with a buddy for parts my Renigade needed but its been a long time) and I know there is a place up by Gunnison in the mountains and they are great. They have the bolts on o rings and whatnot's that a person like me always needs. And they are very knowledgeable and friendly besides the fact they are a Polaris dealer too, LOL. But there is good riding there too and they will help you get your Commander street legal. All this is from memory and I am sure without names it doesn't help but I just wanted to let you know there is more out there. If you know of a place that works on them PLEASE let me know.

01-21-2012, 02:25 PM	#7
ravridge [OP] Junior Member Join Date: Jan 2011 Location: Colorado Member #1552 Posts: 3 ()	Thanks for the welcomes ! Kind of got off of the search for SxS due to the holidays and stuff but the urge has returned. You are right on the money about RPM, I wish there was some dealer competition in the Denver area but hell Greeley is only an afternoon drive away, Durango's quite a ways to go and service during warranty might be tough. As far as someone to work on them if you find someplace please post it.Thanks again

04-27-2012, 02:04 AM	#8
Willyard Junior Member Join Date: Apr 2012 Location: Durango Member #5028 Posts: 2 ()	I got my Can-am Commander X1000 at Fun Center in Durango also. They usually have a lot to choose from but as of yesterday they looked like they sold a ton of inventory. They usually get stuff in fast. Give them a call see what they have in stock or maybe have them order you what you want if they don't have what you're looking for.

04-27-2012, 05:31 PM	#10
1318matt Junior Member Join Date: Nov 2010 Member #1200 Posts: 20 ()	There is a dealer in Grand Junction " All-Terrain Motorsports " and there is a dealer in Montrose "Montrose Implement." I just recently bought two commanders from Caly but I got a sweet deal on them and had a family member haul them out for a family re-union. However, Montrose said they could get me out the door for under 15K on a 2012 X. That is by far the best deal I could find In Colorado. Hope this helps.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New from Colorado - Just got my XT	sheephorn	New Member Introductions & Site Assistance	4	09-30-2010 09:04 PM

New guy from Colorado

can-am commander dealers in colorado