Can-Am Commander Forum banner

Reaction score
1

Marketplace Rating
(0.0 - 0 reviews)

Profile posts Latest activity Discussions Buy & Sell Reviews About

  • · Registered
    Joined
    ·
    7 Posts
    Merry Christmas Jason, Hope ur having a good one. Got a question for you. The flanges busted off three of my wheel studs. Jason, mehanic at Western Equipment in Roseburg says the torque is 75 or 78 lbs I think. I've always torqued mine @ 60. Do you know of a supplier of HD wheel studs and what do you torque your's to.
    Darrell

    · Registered
    Joined
    ·
    7 Posts
    Hey Jason, How did 'ur summer go, work, living in the new hauler, etc? I've been busy most of the summer working on rentals. Haven't been to the dunes much. Let me know when you are going to be down this way. Take care Darrell

    · Registered
    Joined
    ·
    7 Posts
    Jason, WOW!!! That is one really nice HAULER!! Hope U really enjoy it. Was going to try to get up there to meet you but we have 2 vacant rentals needing lots of repair & have to get ready to camp on July 5 & 6 at Hauser. Will try 4 sure on Aug 12. Have a good holiday and hope ur clutch works great. KOA or Myrtlewood on 8/12 ? Let us know. Darrell

    · Registered
    Joined
    ·
    710 Posts
    I haven't ridden since I installed the kit. I just bought a new toy hauler which I will be taking to Winchester over the fourth of July weekend. I'll keep everyone posted as to my thoughts.

    · Registered
    Joined
    ·
    7 Posts
    Hey Jason, Did U get ur new clutch installed? If so, did U get a chance to PRESSURE TEST it? Let me know if U would please. I'm real curious as to how much improvement there is and where. Thanks Darrell

    · Registered
    Joined
    ·
    710 Posts
    I'm here now. My cell is 503-260-4088. I'm in spot 31 on the sand. It's closest to Banshee hill.

    · Registered
    Joined
    ·
    7 Posts
    Jason, Don't know for sure if we will be able to make it up to Winchester. Depends on the weather and I have chores that haven't gotten done with all the rain. If we do make it, what is your cell#? Mine is 541 297 0298. My friend said there are going to be quite a few people up there, drag races by SUPERMAN HILL etc. Hope to see you but if not, have a nice weekend. Changing all lubes today and greasing. Darrell

    · Registered
    Joined
    ·
    710 Posts
    Heck yeah! I'm going to get all my camp shopping done this weekend and most of my gear loaded. I have three friends and neighbors coming with me and maybe a few more. LBR and BLR, who are on this forum will be there too with their X and Rhino. Hope the weather is good!

    · Registered
    Joined
    ·
    7 Posts
    Jason, Dealer thinks problem was faulty Brake sensor..ECM thought brakes were on I guess. Part will B here today, pick up tomorrow I hope. Got 10hr, torque heads, adj. valves. Will chg. all lubes myself. Really anxious to see how it runs. Looking forward to 13th. You can see my tires and maybe U can take me 4 a ride & I can see the diff in shocks. OK? Darrell

    · Registered
    Joined
    ·
    7 Posts
    Jason, I was told that Fullerton Sand Tire has done a lot of testing and supposedly came up with the best set-up for climbing and steering. I got a set, tires and wheels for $1400.00. Talked to Dave @ 714 898 2049 Mine are 16 paddle rear and 1/3 left in center V"s of mud-lites. Go to their site, you probably already have!! Darrell

    · Registered
    Joined
    ·
    710 Posts
    Mine is an X. I don't have sand tires yet. With this wet spring my dirt tires haven't been an issue. Once summer comes I'll need paddles. I'm cautiously looking for the beat tire and price.

    · Registered
    Joined
    ·
    7 Posts
    Good mornin' Jason, I never did ask you, do you have an X or an XT? Got sand tires yet? Only run mine once. Got to engineer a strap-on system where I can run tires on pavement without wearing out. Too expensive to RUB OFF on hard surfaces!!! Darrell

    · Registered
    Joined
    ·
    7 Posts
    Jason, I got a defective wheeler!! It's a rpm sending unit or the ECM. Can Am dropped the ball, didn't send an adapter 4 the tester to determine where the problem is. ECM doesn't know what the RPM"s are so apparently just shuts it down. Had to leave Can Am in Roseburg. Will pick it up latter part of next week I hope. Should be able to REALLY move some SAND then!!!! Darrell

    · Registered
    Joined
    ·
    7 Posts
    Jason, YUP, I had the seatbelt fastened. Always in case the RUBBER SIDE doesn,t stay DOWN!!!!!!!! Hadn,t thought of it but that could create a problem on this HIGH-TECH machine. Will try to come PLAY ON May 13 weekend. Anxious to meet you. Darrell

    · Registered
    Joined
    ·
    7 Posts
    Hey Jason, New digi-tune didn't work any better. Get about 3/4 throttle for about 5 seconds and then it's like somebody shut the fuel off. Tested today with digi-tune disconnected. Act the same. Indicates Can Am problem. Will go to dealer in Roseburg Fri if they can fit me in to diognose and do 10 hr service. Later Darrell

    · Registered
    Joined
    ·
    710 Posts
    Sounds good! I had a good ride at sand lake this past weekend. Put it on it's side but no damage. Gettin' ready for Winchester in May.

    · Registered
    Joined
    ·
    7 Posts
    Hello Jason, Got my digi-tune today and installed to test. Seems to be OK. It schrolls across the readout 3 or 4 times on start up to diognose itself the Muzzy man said. The other one did not do that. Will finish putting back together tomorrow. Got my fingers crossed. Old Dune Rider
  • Loading…
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top