Yoshimura pim2

canamxteam · 01-21-2012, 06:24 PM

http://item.mobileweb.ebay.com/viewi...id=10102353838. Has anybody had any time using this fuel controller? Or if you can adjust the fuel just
Like a pc5 with it?

Xelvic · 01-21-2012, 06:44 PM

I asked about these a while back too. Are these new?

canamxteam · 01-21-2012, 07:04 PM

Sweet thanks for the info I just got a good deal on one I'll let you know how my commander does on the dyno with a big gun exhaust and home made air intake like the Weller racing intake and with this pim2

canamxteam · 01-21-2012, 07:08 PM

I wonder if it adjust the timing like the pc5? On the yosh website for the pim2 there's different maps for 87 or 91 octane so I would think it does adjust the timing

Xelvic · 01-21-2012, 08:17 PM

Yeah it sounds like maybe it's the PC5 re-branded under their name. I hope it does all it says it will. Keep us posted and good luck with it.

Northof49 · 01-21-2012, 10:53 PM

Check out this link to Dragonfire Racing....there is a bit more info here.

Can Am Comander Yoshimura Exhaust

01-21-2012, 06:24 PM	#1
canamxteam [OP] Senior Member Join Date: Dec 2010 Location: statesville,nc Member #1365 Posts: 456 ()	Yoshimura pim2 http://item.mobileweb.ebay.com/viewi...id=10102353838. Has anybody had any time using this fuel controller? Or if you can adjust the fuel just Like a pc5 with it?

01-21-2012, 06:44 PM	#2
Xelvic Senior Member Join Date: Jun 2010 Location: Tucson, AZ Member #312 Posts: 2,407 ()	I asked about these a while back too. Are these new? __________________ 2011 Can am Commander 1000X: 2X Motorsports Tie Rods Can am full skid plates Warn XT 4500 winch Street Legal kit (AZ) BRP Black Race Box Auto Meter Gauges MrRpm oil adapter Engine Oil Cooler MadeByMe Roof CvTech Clutch

01-21-2012, 08:17 PM	#5
Xelvic Senior Member Join Date: Jun 2010 Location: Tucson, AZ Member #312 Posts: 2,407 ()	Yeah it sounds like maybe it's the PC5 re-branded under their name. I hope it does all it says it will. Keep us posted and good luck with it. __________________ 2011 Can am Commander 1000X: 2X Motorsports Tie Rods Can am full skid plates Warn XT 4500 winch Street Legal kit (AZ) BRP Black Race Box Auto Meter Gauges MrRpm oil adapter Engine Oil Cooler MadeByMe Roof CvTech Clutch

01-21-2012, 10:53 PM	#6
Northof49 Member Join Date: Jan 2012 Location: Langley, British Columbia Member #4143 Posts: 54 ()	Check out this link to Dragonfire Racing....there is a bit more info here. Can Am Comander Yoshimura Exhaust __________________ 2012 X Theories are like Doughnut's....Most of them are full of holes!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Yoshimura pim2

anybody use a big gun controller on commander

pim2 yoshimura for can-am commander

01-21-2012, 07:04 PM	#3
canamxteam [OP] Senior Member Join Date: Dec 2010 Location: statesville,nc Member #1365 Posts: 456 ()	Sweet thanks for the info I just got a good deal on one I'll let you know how my commander does on the dyno with a big gun exhaust and home made air intake like the Weller racing intake and with this pim2

01-21-2012, 07:08 PM	#4
canamxteam [OP] Senior Member Join Date: Dec 2010 Location: statesville,nc Member #1365 Posts: 456 ()	I wonder if it adjust the timing like the pc5? On the yosh website for the pim2 there's different maps for 87 or 91 octane so I would think it does adjust the timing

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Yoshimura exhaust for us	MMS	Commander Performance Modifications	5	12-08-2010 03:38 AM
Anyone heard this exhaust? Yoshimura?	orangecrush	Commander Performance Modifications	4	11-23-2010 02:36 PM