Help please with auto tune intsall before i finish

Spud · 01-25-2012, 10:48 PM

Thanks. I think this whole throttle body thing should be cleared up this year. It will make a big difference to us Commander owners.

DynojetResearch · 01-26-2012, 10:40 AM

YOu can click and drag with the mouse to select all cells or use CTRL-A, type in your value and then SEND MAP. I do not recommend putting target AFR values in the 0-2% columns unless you are 100% certain the O2 sensor is located in a good spot and that you do not have any reversion.

yotexterminator · 01-26-2012, 02:45 PM

thanks dynojet. my sensors are in the bungs that Muzzy provides in there systems

WVRidgeRider · 01-26-2012, 11:12 PM

Quote: Originally Posted by USAGUY

Guys I would hold off for a few weeks before you go the cable throttle body route...just a few weeks and you should have FULL throttle control

Tell us more! This would be great!

01-26-2012, 02:45 PM	#13
yotexterminator [OP] Junior Member Join Date: Jan 2012 Member #4159 Posts: 28 ()	thanks dynojet. my sensors are in the bungs that Muzzy provides in there systems __________________ 2012 1000xt Jensesn FM/AM/Ipod stereo Muzzy Sport pipes Can Am roof and half windshield Koplin Rear Windshield Muzzy Black Box 2" wheel spacers PCV with dual autotune Weller Racing Intake (Awesome!) 20" Rigid E series light bar

01-26-2012, 11:12 PM	#14
WVRidgeRider Senior Member Join Date: Jul 2011 Location: West Virginia Member #2862 Posts: 149 ()	Quote: Originally Posted by USAGUY Guys I would hold off for a few weeks before you go the cable throttle body route...just a few weeks and you should have FULL throttle control Tell us more! This would be great! __________________ 2012 Commander X, Pro Armor Doors, Viper 4000 WS, Can Am Half Windsheild, EMP Top, EMP Stereo, Can Am Windscreen, Can Am Fender Flares, Full Factory UTV Skids/Arm Guards, K&T Box, AIRDAM/STM Clutch, Can Am Rear Speaker Pods.... Thermo Tec'd Engine Compartment-

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Free dyno tune	GATEWOODPOWERSPORTS	Commander Performance Modifications	0	01-01-2012 08:24 PM
Tune Monster	thom0329	Commander Performance Modifications	4	12-27-2011 10:27 PM
New auto meter gauges	BREAKINWIND	Commander General Discussion	95	06-25-2011 07:13 AM
Utv inc billet convex rear view mirror - polished finish [2519]	UTV Inc	UTV Inc	1	02-05-2011 01:59 PM
10 hour tune up	Paka	Commander General Discussion	11	12-26-2010 03:30 AM

Help please with auto tune intsall before i finish

black box for autotune

auto tune afr for can am commander

canam commander with auto tune

instalation rigid e series can am outlander

01-25-2012, 10:48 PM	#11
Spud Senior Member Join Date: Nov 2010 Location: Oceanside Ca Member #1155 Posts: 609 ()	Thanks. I think this whole throttle body thing should be cleared up this year. It will make a big difference to us Commander owners.

01-26-2012, 10:40 AM	#12
DynojetResearch Member Join Date: Nov 2011 Member #3734 Posts: 31 ()	YOu can click and drag with the mouse to select all cells or use CTRL-A, type in your value and then SEND MAP. I do not recommend putting target AFR values in the 0-2% columns unless you are 100% certain the O2 sensor is located in a good spot and that you do not have any reversion.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)