Shaft saver bypass not working

DG82 · 01-17-2012, 05:28 PM

Any ideas on why my shaft saver black box is not working on my 2011 X. Ive tried three different Dobeck brand ones. Also reset the computer. Dobeck claims they have sold 1000 and all have worked but mine. Muzzy claims all theirs have worked.

Wes · 01-17-2012, 06:20 PM

What are you expecting it to do ?

DG82 · 01-17-2012, 06:35 PM

I was hoping it would stop pulling power back when the tires came off the ground. When i jack the back up nothin changes with or without the box on it when you spin the tires.

Wes · 01-17-2012, 07:12 PM

Try to do a donut on gravel road
I have never lifted mine to see what happens
These boxes does not fully stop the problem, but i can spin my tires freely
I have heard the kt box works the best

Rhinorehab · 01-17-2012, 07:59 PM

Is your seatbelt fastened when you try this???

DG82 · 01-17-2012, 09:22 PM

That is one thing i was wondering about. My seat belt is bypassed due to having harnesses in it now.

oakley_xc · 02-01-2012, 10:36 AM

Quote: Originally Posted by DG82

That is one thing i was wondering about. My seat belt is bypassed due to having harnesses in it now.

IM in the same boat over large jumps it cuts out like stock. Think I wil try K&T box

commanderman · 02-01-2012, 12:44 PM

Mine cuts out some but nothing like it did before I installed the black box.

bonez · 02-01-2012, 01:15 PM

Is this problem only on 2010 & 2011 models I have 400 miles on my commander and have never experienced this problem. Any other 2012's have this problem?

commanderman · 02-01-2012, 04:39 PM

Mine is a 2012. They are the same as 11's.

01-17-2012, 05:28 PM	#1
DG82 [OP] Senior Member Join Date: Jan 2012 Location: Ponca City OK Member #4224 Posts: 109 ()	Shaft saver bypass not working Any ideas on why my shaft saver black box is not working on my 2011 X. Ive tried three different Dobeck brand ones. Also reset the computer. Dobeck claims they have sold 1000 and all have worked but mine. Muzzy claims all theirs have worked.

01-17-2012, 07:59 PM	#5
Rhinorehab Senior Member Join Date: Jan 2011 Location: Gresham, Oregon Member #1660 Posts: 508 ()	Is your seatbelt fastened when you try this??? __________________ My Youtube Channel http://www.youtube.com/user/Rhinoryde?feature=mhee

02-01-2012, 10:36 AM	#7
oakley_xc Junior Member Join Date: Mar 2011 Location: TN Member #2074 Posts: 21 ()	Quote: Originally Posted by DG82 That is one thing i was wondering about. My seat belt is bypassed due to having harnesses in it now. IM in the same boat over large jumps it cuts out like stock. Think I wil try K&T box __________________ Commander X..... King racing shocks, Wicked Built power steering, Twisted stitch seats, BlingStar Doors, Holz roof, Holz bumper, Muzzy Black Box, Turn Key harness bar,Corbeau 5 point, Turn Key tierods, UHMW full skids, Can-Am/ Warrent racing factory tuned.....

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Shaft Saver /Traction Control	WVRidgeRider	Commander General Discussion	19	08-08-2011 12:44 PM
Unisteer: Verifying it's working???	XTCntn	Commander General Discussion	15	06-19-2011 09:20 AM
working the commander	v-twin	Commander Videos & Pictures	9	12-01-2010 09:54 PM
still working the wife	RiverRider	New Member Introductions & Site Assistance	6	11-12-2010 09:44 PM
Shaft reinforcemnt	desa	Commander Performance Modifications	11	09-19-2010 10:48 PM

Shaft saver bypass not working

can am commander shaft saver

can-am commander blackbox not working

can am commander bypass

can am commander dobech perfomance work

01-17-2012, 06:20 PM	#2
Wes Senior Member Join Date: Apr 2011 Location: Indiana Member #2289 Posts: 407 ()	What are you expecting it to do ?

01-17-2012, 06:35 PM	#3
DG82 [OP] Senior Member Join Date: Jan 2012 Location: Ponca City OK Member #4224 Posts: 109 ()	I was hoping it would stop pulling power back when the tires came off the ground. When i jack the back up nothin changes with or without the box on it when you spin the tires.

01-17-2012, 07:12 PM	#4
Wes Senior Member Join Date: Apr 2011 Location: Indiana Member #2289 Posts: 407 ()	Try to do a donut on gravel road I have never lifted mine to see what happens These boxes does not fully stop the problem, but i can spin my tires freely I have heard the kt box works the best

01-17-2012, 09:22 PM	#6
DG82 [OP] Senior Member Join Date: Jan 2012 Location: Ponca City OK Member #4224 Posts: 109 ()	That is one thing i was wondering about. My seat belt is bypassed due to having harnesses in it now.

02-01-2012, 12:44 PM	#8
commanderman Senior Member Join Date: Mar 2011 Location: Logan, UT Member #2030 Posts: 195 ()	Mine cuts out some but nothing like it did before I installed the black box.

02-01-2012, 01:15 PM	#9
bonez Senior Member Join Date: Nov 2011 Location: novi mi Member #3913 Posts: 139 ()	Is this problem only on 2010 & 2011 models I have 400 miles on my commander and have never experienced this problem. Any other 2012's have this problem?

02-01-2012, 04:39 PM	#10
commanderman Senior Member Join Date: Mar 2011 Location: Logan, UT Member #2030 Posts: 195 ()	Mine is a 2012. They are the same as 11's.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)