Belt Issue Fix?

This is a discussion on Belt Issue Fix? within the Commander General Discussion forums, part of the Can-Am Commander General Discussion category; What's the STM kit?[/QUOTE] New primary and secondary clutches sorry should have specified. Although if you're looking for a kit Holz finally came out with ...

Go Back   Can-Am Commander Forum > Can-Am Commander General Discussion > Commander General Discussion

Reply
 
LinkBack Thread Tools Display Modes
Old 01-31-2012, 05:54 PM   #21
Senior Member
 
superbri's Avatar
 
Join Date: Jan 2011
Location: Eastvale, CA
Member #1538
Posts: 360
View superbri's Photo Gallery()
What's the STM kit?[/QUOTE]

New primary and secondary clutches sorry should have specified. Although if you're looking for a kit Holz finally came out with theirs which is pretty good I hear.
__________________
2011 Red XT, custom 4 seat radius cage/TS rear seat, K&T box, 2X tie rods, Elka stage 4 shocks, Full STM clutch
superbri is offline   Reply With Quote
Sponsored Links
Old 01-31-2012, 06:10 PM   #22
Senior Member
 
Redstroke's Avatar
 
Join Date: Nov 2011
Location: Swartz Creek MI
Member #3715
Posts: 129
View Redstroke's Photo Gallery()
LOL its one of those expensive kits! About $2200 for the STMs...

Quote: Originally Posted by superbri View Post
What's the STM kit?
New primary and secondary clutches sorry should have specified. Although if you're looking for a kit Holz finally came out with theirs which is pretty good I hear.[/QUOTE]
__________________
2006 Camo Rhino, 2010 Rotax 800, muzzy duals, dobeck power commander, AEM AFR, STM Rage 6, Tuner Secondary, dual odyssey batteries, AFE under hood custom intake, Progressive 425 HD shocks, livnlo harness, ITP Beadlocks 26" Bighorn 2.0s, UTV Inc rear cage and seat.
http://s40.photobucket.com/albums/e228/RedStroke/Rotax%20Rhino/
Redstroke is offline   Reply With Quote
Old 02-01-2012, 09:29 AM   #23
Member
 
Yellow1000's Avatar
 
Join Date: May 2011
Location: winfield mo
Member #2594
Posts: 98
View Yellow1000's Photo Gallery()
in my opinion the current options for clutching are priced way to high . that's why i hope i really found a better belt, that's good enough for now.
__________________
Yellow 1000
27.5 pitbull growlers/ 25.5 rockers for rainy days LOL
Wicked built PS
Heat wrapped and sound deadened
Stage 4 elka shocks
Hmf
Torsion bar removed / X front sway added.
Yellow1000 is offline   Reply With Quote
Old 02-01-2012, 10:44 AM   #24
Senior Member
 
CanAmCrazy's Avatar
 
Join Date: Jul 2011
Location: Pike County, Kentucky
Member #2986
Posts: 670
View CanAmCrazy's Photo Gallery()
I put about 40 miles on my Gates belt yesterday and it makes the clutch feel MUCH smoother from the takeoff. Hope to get 2000 miles out of it, but I'd be happy to get 1500.
__________________
2012 Commander X
Muzzy Black Box
Can Am half-windshield
UTV Hardtop Roof
Can Am rear mesh
2" wheel spacers
Wrapped exhaust
Thermotec Heat insulation
Shark 600 watt marine stereo system
Blingstar Suicide Doors
Hot Brunette riding shotgun!!!!
CanAmCrazy is offline   Reply With Quote
Old 02-02-2012, 08:14 AM   #25
Senior Member
 
Join Date: Mar 2010
Location: Northeast Lower Michigan
Member #189
Posts: 129
View 68dodgeramman's Photo Gallery()
Quote: Originally Posted by Redstroke View Post
LOL its one of those expensive kits! About $2200 for the STMs...

Quote: Originally Posted by superbri View Post
What's the STM kit?
New primary and secondary clutches sorry should have specified. Although if you're looking for a kit Holz finally came out with theirs which is pretty good I hear.
[/QUOTE]
Yeah thanks RedStroke, I won't be getting the STM kit, lol. But I will start with the belt
__________________
2012 Can-Am Commander 1000X.
68dodgeramman is offline   Reply With Quote
Old 02-09-2012, 06:39 PM   #26
Member
 
Join Date: Oct 2011
Location: Wisconsin
Member #3668
Posts: 36
View Turner's Photo Gallery()
I ordered Gates G force belt from auto part store 57.99 it will be here tomorrow.
Turner is offline   Reply With Quote
Old 02-10-2012, 11:15 PM   #27
Junior Member
 
Join Date: Dec 2011
Location: North-Central WA
Member #4041
Posts: 15
View Mtnvarmit's Photo Gallery()
better price

Here's a btter price. 03G3470 Gates G-Force CVT Belt

03G3470 Gates G-Force CVT Belt
Reg. Price: $51.90
Sale Price: $35.15

-G
__________________
2012 Commander X
Mtnvarmit is offline   Reply With Quote
Old 02-10-2012, 11:29 PM   #28
Senior Member
 
SaintlyBrees's Avatar
 
Join Date: Sep 2011
Location: Chama, NM
Member #3371
Posts: 251
View SaintlyBrees's Photo Gallery()
Quote: Originally Posted by Mtnvarmit View Post
Here's a btter price. 03G3470 Gates G-Force CVT Belt

03G3470 Gates G-Force CVT Belt
Reg. Price: $51.90
Sale Price: $35.15

-G
Nice price. Even with shipping it only comes to $48 and change. Sigh, and I just ordered a spare for $64...

Still, bookmarked it for the future. Thanks for the heads up.

Edit:
Suggest folks look up the part. I don't believe this is the right part for the Commander. The Gates site refers to a belt #30G3750 as the correct belt for the machine. Discount Fleet also has that belt for the same price as the one referred to above. Just suggesting folks check for themselves to make sure that they get the right belt.

Gates site:
Commander belt. Can't link direct - you'll have to enter the search data.
__________________


2012 800R XT Camo

In-dash Garmin 650t Navigation (TX to Bryan for his install video)
Bad Dawg Hard Roof
Bad Dawg 1/2 Windshield
Bad Dawg Dual Storage in rear
Rear view Mirror
TurnKey UTV Heat Shield for bed
TurnKey UTV Harness Bar
Can-Am LH & RH Side Mirrors
Rear Can-Am Screen
Can-Am Snow Plow
Can-Am radiator protector
Can-Am Cover
K&N Air Filter
12/1/14 - Extended warranty ends and mods begin


Last edited by SaintlyBrees; 02-10-2012 at 11:49 PM.
SaintlyBrees is offline   Reply With Quote
Old 02-11-2012, 12:50 AM   #29
Member
 
Join Date: Jan 2011
Location: Idaho
Member #1746
Posts: 39
View munozca's Photo Gallery()
Quote: Originally Posted by SaintlyBrees View Post
Quote: Originally Posted by Mtnvarmit View Post
Here's a btter price. 03G3470 Gates G-Force CVT Belt

03G3470 Gates G-Force CVT Belt
Reg. Price: $51.90
Sale Price: $35.15

-G
Nice price. Even with shipping it only comes to $48 and change. Sigh, and I just ordered a spare for $64...

Still, bookmarked it for the future. Thanks for the heads up.

Edit:
Suggest folks look up the part. I don't believe this is the right part for the Commander. The Gates site refers to a belt #30G3750 as the correct belt for the machine. Discount Fleet also has that belt for the same price as the one referred to above. Just suggesting folks check for themselves to make sure that they get the right belt.

Gates site:
Commander belt. Can't link direct - you'll have to enter the search data.
Or buy two for $81 (including shipping).
munozca is offline   Reply With Quote
Old 02-11-2012, 05:42 PM   #30
Junior Member
 
Join Date: Jan 2012
Location: SoCal
Member #4111
Posts: 9
View jwsigler's Photo Gallery()
I just got a Gates Belt as a spare. In the service manual it states for the OEM belt that the arrows should point forward, but the Gates belt has no arrows. Any idea if the Gates belt is direction sensitive? My thought is to install it so the writing on the belt is right side up looking down at the belt.
jwsigler is offline   Reply With Quote
Reply

Lower Navigation
Go Back   Can-Am Commander Forum > Can-Am Commander General Discussion > Commander General Discussion


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Search tags for this page

gates g-force belts forum

,

30g3750

,

can am commander belt

,

can am commander issues

,

can am gates g force belts reviews

,

holz commander 1000 clutching

,

can am going to fix commander problems

,

2011 can-am commander 1000xt strong gear oil smell

,

gforce belt cvt install direction

,

30g3750 gates g-force cvt belt

,

can am commander half windshield review

,

can am belts always break

,

can am commander belt problems

,
belt problem can am commander 1000
,
gates g-force belt sizes
,
30g3750 g force belt
,
commander belt fix
,
gates belts 30g3750
,
can am commander belt number
,
how to fix can-am
Click on a term to search our sites for related topics.

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
seat belt issue and i want the stocker gone joshuabuilt Commander General Discussion 4 07-16-2011 10:30 PM
Anybody had this issue???? TWISTED Commander General Discussion 2 06-05-2011 03:34 PM
Dry Rot issue! Crazy Diamond Commander General Discussion 7 04-24-2011 08:56 AM
Tire issue. markl Commander Wheel and Tire Discussion 14 04-19-2011 05:39 AM
Commander XT Belt Issue. dmbuhanNJ Commander General Discussion 21 10-20-2010 09:50 AM


All times are GMT -5. The time now is 05:13 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2012, vBulletin Solutions, Inc.