I got some tech questions

RideRed · 06-08-2010, 05:22 PM

I was looking at a view from the back and is that the muffler just above the back axle and below the trunk? If so think it might be a little low if you get stuck in a deep wet mud hole.

Does it have power steering?

How many turns for lock to lock on the steering?

what type of seat belts does it have?

Can aftermarket seats be added without great modification?

I hope hand controles can be added along with being able to add a heater and cab enclosed.

Brian B · 06-08-2010, 05:36 PM

Quote: Originally Posted by RideRed

I was looking at a view from the back and is that the muffler just above the back axle and below the trunk? If so think it might be a little low if you get stuck in a deep wet mud hole.

Yes. Thats the muffler. Not sure if it will affect under water riding.

Does it have power steering?

Nope. Doesnt need it. It's very easy to steer! I'm sure Unisteer will have a system available.

How many turns for lock to lock on the steering?

Hard to remember. Definitely less than 2.

what type of seat belts does it have?

Automotive style. Very easy to use.

Can aftermarket seats be added without great modification?

No problem! However, the factory seats are very comfortable!

I hope hand controles can be added along with being able to add a heater and cab enclosed.

Adding hand controls should be very easy on this machine. It has a "drive by wire" throttle system. You could relocate the factory potentiometer sensor from the pedal to the steering wheel.

v-twin · 06-08-2010, 07:57 PM

it looks like it has the old locking front diff in it.I hope im wrong........

Ditchdigger · 06-08-2010, 08:09 PM

Will Can-Am be comming out with a enclosed cab soon?

Brian B · 06-08-2010, 08:40 PM

Quote: Originally Posted by v-twin

it looks like it has the old locking front diff in it.I hope im wrong........

Visco-lock. Yes.

RideRed · 06-08-2010, 09:01 PM

Thanks for the reply. I am definatly going to have to check one out when they come into the dealerships. I really do not want to buy a polaris after all that is what left me kind of f-ed up and the renegade I rode really impressed me and I always liked brp products.

v-twin · 06-08-2010, 09:05 PM

Quote: Originally Posted by Brian B

Quote: Originally Posted by v-twin

it looks like it has the old locking front diff in it.I hope im wrong........

Visco-lock. Yes.

I hope the visco lock qe like on the 1010 xt.never was happy with my visco lock on my 07 outty

XXXOffroad · 06-09-2010, 08:38 AM

Quote: Originally Posted by v-twin

Quote: Originally Posted by Brian B

Quote: Originally Posted by v-twin

it looks like it has the old locking front diff in it.I hope im wrong........

Visco-lock. Yes.

I hope the visco lock qe like on the 1010 xt.never was happy with my visco lock on my 07 outty

It is not the Visco qe.

Mountain Mailman · 06-09-2010, 08:42 AM

Is there a hand brake for parking, like the Rhino?

XXXOffroad · 06-09-2010, 08:44 AM

Quote: Originally Posted by Mountain Mailman

Is there a hand brake for parking, like the Rhino?

No hand brake, but the tranny doesn't bind up in park like the RZR.

06-08-2010, 05:22 PM	#1
RideRed [OP] Junior Member Join Date: May 2010 Location: Hastings MN Member #278 Posts: 5 ()	I got some tech questions I was looking at a view from the back and is that the muffler just above the back axle and below the trunk? If so think it might be a little low if you get stuck in a deep wet mud hole. Does it have power steering? How many turns for lock to lock on the steering? what type of seat belts does it have? Can aftermarket seats be added without great modification? I hope hand controles can be added along with being able to add a heater and cab enclosed.

06-08-2010, 05:36 PM	#2
Brian B Administrator Join Date: Apr 2009 Member #23 Posts: 211 ()	Quote: Originally Posted by RideRed I was looking at a view from the back and is that the muffler just above the back axle and below the trunk? If so think it might be a little low if you get stuck in a deep wet mud hole. Yes. Thats the muffler. Not sure if it will affect under water riding. Does it have power steering? Nope. Doesnt need it. It's very easy to steer! I'm sure Unisteer will have a system available. How many turns for lock to lock on the steering? Hard to remember. Definitely less than 2. what type of seat belts does it have? Automotive style. Very easy to use. Can aftermarket seats be added without great modification? No problem! However, the factory seats are very comfortable! I hope hand controles can be added along with being able to add a heater and cab enclosed. Adding hand controls should be very easy on this machine. It has a "drive by wire" throttle system. You could relocate the factory potentiometer sensor from the pedal to the steering wheel. __________________ #26 Pro-Mod UTV 2006 Rotax 912cc Rhino Rotax Your Rhino www.UTVRacing.com

06-08-2010, 08:40 PM	#5
Brian B Administrator Join Date: Apr 2009 Member #23 Posts: 211 ()	Quote: Originally Posted by v-twin it looks like it has the old locking front diff in it.I hope im wrong........ Visco-lock. Yes. __________________ #26 Pro-Mod UTV 2006 Rotax 912cc Rhino Rotax Your Rhino www.UTVRacing.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

I got some tech questions

can am commander heater

can am commander parking brake

canam comander heaaters

can-am commander heater

canam commander heater

can am commander emergency brake

can-am commander parking brake

can am commander heaters

can am commander heater instal

can am commander parking break

cammander heater can am

parking brake can am commander

heater for can am commander

can am commander hand controls

heater for canam commander

parking brake on can am commander

can-am commander with heater

can-am commander handbrake

can-am commander parking brake location

can-am commander heaters

06-08-2010, 07:57 PM	#3
v-twin Senior Member Join Date: May 2010 Location: kentucky Member #286 Posts: 220 ()	it looks like it has the old locking front diff in it.I hope im wrong........

06-08-2010, 08:09 PM	#4
Ditchdigger Senior Member Join Date: May 2010 Location: Philipsburg, Montana. USA Member #274 Posts: 1,225 ()	Will Can-Am be comming out with a enclosed cab soon?

06-08-2010, 09:01 PM	#6
RideRed [OP] Junior Member Join Date: May 2010 Location: Hastings MN Member #278 Posts: 5 ()	Thanks for the reply. I am definatly going to have to check one out when they come into the dealerships. I really do not want to buy a polaris after all that is what left me kind of f-ed up and the renegade I rode really impressed me and I always liked brp products.

06-08-2010, 09:05 PM	#7
v-twin Senior Member Join Date: May 2010 Location: kentucky Member #286 Posts: 220 ()	Quote: Originally Posted by Brian B Quote: Originally Posted by v-twin it looks like it has the old locking front diff in it.I hope im wrong........ Visco-lock. Yes. I hope the visco lock qe like on the 1010 xt.never was happy with my visco lock on my 07 outty

06-09-2010, 08:38 AM	#8
XXXOffroad Member Join Date: May 2010 Location: Sedalia CO Member #228 Posts: 52 ()	Quote: Originally Posted by v-twin Quote: Originally Posted by Brian B Quote: Originally Posted by v-twin it looks like it has the old locking front diff in it.I hope im wrong........ Visco-lock. Yes. I hope the visco lock qe like on the 1010 xt.never was happy with my visco lock on my 07 outty It is not the Visco qe.

06-09-2010, 08:42 AM	#9
Mountain Mailman Junior Member Join Date: Jun 2010 Location: Utah Member #317 Posts: 11 ()	Is there a hand brake for parking, like the Rhino?

06-09-2010, 08:44 AM	#10
XXXOffroad Member Join Date: May 2010 Location: Sedalia CO Member #228 Posts: 52 ()	Quote: Originally Posted by Mountain Mailman Is there a hand brake for parking, like the Rhino? No hand brake, but the tranny doesn't bind up in park like the RZR.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)